Microneedling RF Machine Crystallite Skin Tightening

What is Microneedling RF Machine?

Microneedling RF Machine is a device that combines + insulating microneedle + dot matrix technology. The RF Microneedle machine is equipped with interchangeable 4 different probe configurations (12p, 24p, 40p, nano-probe). And the system can be freely adjusted to set the insulating Crystallite head to penetrate into the skin at different depths of the target tissue (between 0.5-7mm).

Working Principle of Microneedling RF Machine

Microneedling RF Machine is a minimally invasive fractional treatment combining microneedles and RF energy. Under the control of the electronic system, dozens of insulated needles quickly penetrate the epidermis at the same time, emit RF energy from the needle tip, and then quickly exit the skin.

RF energy is penetrated deep into the skin through tiny needles, causing tiny damage, penetrating and opening the absorption channel of the skin. So that nutritional products can enter the skin, and trigger the body's natural healing response.

How does Microneedling RF Machine work?

Professional RF Microneedling Devices works by introducing radio frequency technology to gently heat facial skin after micro-lesions are performed to help restore and resurface connective tissues. When it is heated to forty-two to forty-three degrees Celsius, collagen, which is the main structural protein in connective tissues, breaks down.

Over the course of six-weeks, collagen that is broken down during a treatment reforms and connective tissues become much tighter and stronger. The face is lifted and volume is added to hallow areas.

Application of Microneedling RF Machine

• Skin Rejuvenation
• Face Lift
• Wrinkle Removal
• Acne Removal
• Skin Tightening
• Scar Removal
• Anti-aging
• Stretch Marks Removal

Advantages of Microneedling RF Machine

• Double handle design, wide range of treatment.
• A variety of probe specifications: 12P, 24P, 40P, nano crystal head, one-time non reusable for more peace of mind.
• Provide the deepest RF fractional therapy, which can penetrate subcutaneous tissue up to 8mm.
• Realize humanized operation: the depth can be adjusted between 0.5 and 7mm, the depth of the needle can be adjusted freely, and it can be used on skin of any thickness.
  

Q&A

Q1: The difference between this Microneedling RF Machine and other Skin Rejuvenation Machines？

A1: Penetrates deeper - That is the depth of thermal action is deeper. The depth can be adjusted from 0.5-7mm according to clinical needs, while the thermal action depth of fractional laser is usually ≤1mm. Therefore, the Micro-crystalline Depth 8 is more advantageous for deeper acne pits, enlarged pores and skin tightening.

Q2: Will the treatment be painful? Do I need to apply anesthesia during treatment?

A2: Pain perception and tolerance vary from person to person, and they also depend on all parts of the body. Micro-needles usually require application of anesthesia, if the client can bear his pain, it is not necessary to apply anesthesia.

Q3: How long does a single treatment take?

A3: Treatment usually takes 15 to 20 minutes, depending on the size of the treatment area.

Q4: How often can I have a treatment?

A4: The recommended interval between each treatment is 4-6 weeks. It takes 28 days to make new collagen. The skin will continue to remodel for 3 months. However,treatment will be separated by nearly 1 month, and the results will be superimposed.

Q5: How long will the recovery period take?

A5: The short recovery time is generally about 4 days, and the long recovery time is 14 days, and even more than 20 days. Everyone's physical condition is different, and recovery time will also vary.

Q6: When will you see the result?

A6: Visible improvements are seen within days of treatment, and complete results can be seen within 2-3 months as the collagen and elastin production process continues to improve.

Specifications of Microneedling RF Machine

• Therapy Probe: 12P, 24P, 40P, Nanocrystalline Head
• Touch screen: 15inch
• Handles: 2pcs
• Depth: 0.5-7mm
• Output Frequency: 4MHz
• Power: 10-300W
• Package size: 40×43×42cm
• G.W: 13kgs

Package List

• Main machine *1pc
• Working handles *2pcs
• Cartridges * 4pcs(12P+24P+40P+Nanocrystalline Head)
• Power cord *1pc